Hutt W55 - Operation Instructions & Attentions; Safety Rope; Inspection of the Working Environment; Cleaning

5-6
clean water on the mop. Please
don’t make t
Pay attention to the cloth should not be too wet, dirty cloth is recommended to clean and
dry before use
.
Please use original cloth, non-original cloth will affect the machine performance.
he mop all wet, and do not spray on t he track.In standby mode, press
turn off the bottom power switch.
（In case of loss of remote control）
Turn on the bottom power switch，
When the machine finishes cleaning the window and stops working, hold the safety
rope in one hand and press the round button until the suction decreases.Then take off
the machine.
and hold the round key for the track to rotate automatically, and wipe the dirt on the track
surface with a clean wet cloth.
glass