Huvitz CCP-7000 - 1. GENERAL; 1-1 How to use the manual

2
1. GENERAL
1-1 How to use the manual
Use this manual in accordance with the following flowchart at the time of initial inspection or when inspection,
adjustment or repair are needed to correct problems:
Operation sequence
Manual
Reference Page
Inspection
End
Identifying the location of problem
Implementation of repair
Locating the cause of problem
Initial Inspection
Occurrence of
a problem
Inspection
Normal
NO
YES
OK
NO
Inspection/adjustment
Troubleshooting
Disassembly/reassembly
Assembly adjusting procedure
Disassembly/reassembly
Inspection/adjustment procedures
P. 8
P. 1 0
P. 3 0
P. 1 0
P. 1 0
P. 8