What to do if HWASHIN POWERSONIC 420 doesn’t start?
If your HWASHIN Ultrasonic Jewelry Cleaner doesn’t start, here are a few things you can check: * Ensure the unit is properly plugged into the electrical outlet. * Make sure the power button is switched on. * If the start button is faulty or the fuse is blown, it is recommended to call the nearest service for assistance or replace with a new fuse located on the back of the unit/fuse box.
Why is the ultrasonic activity decreased in my HWASHIN Ultrasonic Jewelry Cleaner?
Decreased ultrasonic activity in your HWASHIN Ultrasonic Jewelry Cleaner can occur for several reasons: * The cleaning solution may be spent or dirty, in which case you should change the solution. * The solution level might be too low, so add more solution. * The liquid level may be incorrect for the load; adjust the level with the load until activity increases. * The bath bottom may be covered with soil particles; clean the bath with warm water and a nonabrasive cloth.
What to do if HWASHIN POWERSONIC 420 Ultrasonic Jewelry Cleaner operates but does not heat?
If your HWASHIN Ultrasonic Jewelry Cleaner operates but does not heat, the cause may be faulty heater elements, and it is recommended to call the nearest service center.
General| Brand | HWASHIN |
|---|---|
| Model | POWERSONIC 420 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
Warnings regarding high voltage, disassembly, grounding, and immersion in water.
Cautions on keeping the unit dry, avoiding flammable solutions, and using water-based solutions.
Warnings against mineral acids, unvented covers, and placing hands in the bath, plus temperature advice.
Cautions about operating without liquid, regular solution changes, and proper item placement.
Explains how ultrasonic cleaning works through cavitation and lists common applications.
Details the functions of the LED display and control buttons on the unit.
Illustrates the front and rear views of the cleaner, identifying the cover, body, and connections.
Step-by-step guide on how to operate the ultrasonic cleaner for cleaning tasks.
Describes direct and indirect cleaning methods, outlining their advantages and procedures.
Guidelines on overload, liquid level, temperature, load size, and corrosive solutions.
Specifies suitable water-based solutions and cautions against using others like alcohol or acids.
Lists common problems, their causes, and suggested solutions for the cleaner.
Provides detailed specifications for models 405, 410, and 420, including capacity and power.
Details the one-year warranty and guidelines for obtaining service or repairs.
Instructions for seeking repair, emphasizing not to disassemble the unit due to high voltage.
To Next Page
