To Next PageTo Next PageWhy does the HWH 200 hydraulic pump activate without using the control valve handles?
This can occur if the panel is off, the room control switch is faulty, or there's a faulty wire or electrical connection.
Why won't my HWH 200 Lifting Systems pump activate?
The pump may fail to activate due to a low engine battery or a faulty wire or electrical connection.
What causes the HWH 200 pump to run but the room doesn't move?
This can happen if the grounding switch on the valve isn't working, the pump relay isn't functioning, or the pump isn't grounded.
General| Brand | HWH |
|---|---|
| Model | 200 series |
| Category | Lifting Systems |
| Language | English |
Overview of the HWH 200 series joystick-controlled hydraulic leveling system.
Essential safety precautions for operating the leveling and room extension systems.
Identification and function of buttons and lights on the hydraulic leveling panel.
Step-by-step instructions for leveling the vehicle using the hydraulic system.
Detailed procedure for extending the RV room using the control switch.
Instructions for retracting the RV room using the normal control switch.
Solutions for problems with jack retraction and pump operation.
Troubleshooting for warning lights, leveling lights, and room creep.
