Hybrid Advantage - PRO1 WIRELESS & WIRED DIGITAL WALL STAT CONFIGURATION; Steps to Follow; Detach Controller Cover

32 pages

To Next Page

To Previous Page

PRO1 WIRELESS & WIRED DIGITAL WALL STAT CONFIGURATION

Steps to follow:

1. Power “OFF” the unit.

2. Turn “OFF” all the dip switches by push them DOWN.

3. Turn “ON” S3 which is # 2 (OR SECOND) switch on the second block from right by

pushing it UP. (Also, encircle in RED below)

4. Detach the controller cover