HYC LintEater - Step 2: Select Dryer Heat Cycle; Step 3: Check Exterior Airflow

7
Selectaheatcycleonthedryerandthen
turnthedryeron.

Gototheexteriorandcheckforairflowcomingout
oftheventhood.

ͲIfthereis NoairflowͲ go to step 4.
ͲYes,thereisairflowͲ
go to step 7.
If there is a screen over the vent hood, remove it and do not re-install as it will collect lint.
Step2
Step3
ImportantNote: