Name: HYDAC International CS 1000 Series
Brand: HYDAC International
Rating: 4 (1 reviews)

To Next Page

CS 1000 Series

ContaminationSensor

Operating and maintenance instructions

English

Valid for firmware version V 2.02

Doc.: 3247149L / 2007-02-01

Default Chapter3
- Table of Contents3
Foreword7
- Customer Service8
- Modifications to the Product8
- Warranty8
1 General Safety Precautions10
- Obligations and Liability10
- Abbreviations and Basic Symbols10
  - Basic Symbols11
- Proper/Designated Use11
- Improper Use11
- Safety Devices11
- Informal Safety Precautions11
- Instructions to be Followed in the Event of an Emergency12
- Training and Instruction of Personnel13
2 What's New - Document History14
3 Transportation, Packing, Storage15
- Transportation and Packing15
- Storage15
  - Storage Conditions15
4 Model Code / Product Identification16
5 Scope of Delivery17
6 Description18
- Restrictions Pertaining to the CS18
- Cs1X1X Dimensions (Without Display)19
- Cs1X2X Dimensions (with Display)19
- Connection Types20
  - Pipe or Hose Connection Type (Cs1Xxx-X-X-X-X0/-XXX)20
  - Flange Connection Type (Cs1Xxx-X-X-X-X-1/-XXX)20
7 Installation and Wiring21
- Unpacking21
- Mechanical Mounting21
  - Display Rotatable/Adjustable as Needed22
- Hydraulic Installation22
- Electrical Installation27
8 Description of the Measuring Modes29
- Mode M1: Measure Continuously29
- Mode M2: Measure Continuously and Switch29
- Mode M3: Filter down to Contamination Level and Stop29
- Mode M4: Filter to Establish Contamination Levels Continuously30
- Mode M5: "SINGLE" Measurement30
9 Operating the CS31
- Display and Keypad Elements (Cs122X Only)31
- Modes and Menus34
- Description of the Switching Output in the Measuring Modes42
- Switching Behavior of the Switching Output44
10 Menu Overview46
- Menu CS 12Xx (ISO 4406:1999 and SAE)46
- Menu CS 13Xx (ISO 4406:1987 and NAS)47
11 Analog Output (Anaout)49
- SAE Classes Acc. to as 405949
- ISO Code Acc. to 4406:199957
- ISO Code Acc. to 4406:198764
- National Aerospace Standard NAS 1638 (CS 13Xx, Only)71
- Fluid Temperature ( TEMP )78
  - Temperature Table78
12 Error Messages80
- Status LED / Display80
- Exceptions Errors81
- Analog Output Error Signals82
  - Analog Signal Time-Coded82
  - Analog Signal for HDA 550083
    - HDA Status Signal 5 Table83
13 Condition Sensor Interface (CSI-D-5)84
- Scope of Delivery84
- CSI-D-5 Connection Schematic84
- Power Adaptor Set-Up84
14 Interface86
15 Removing the CS from the Hydraulic System / Decommissioning87
- Disposal / Recycling87
16 Spare Parts and Accessories87
17 ISO 4406 / SAE as 4059 / NAS1638 Classes88
- Iso 4406:199988
  - ISO 4406 Table88
  - Overview of the Differences between ISO 4406:1987 and ISO 4406:199989
- Sae as 405990
  - SAE as 4059 Table90
  - The SAE Cleanliness Classes Can be Represented as Follows91
- Nas 163892
18 Factory Default Settings / Basic Settings93
- Power up Menu93
- Measuring Menu93
19 Technical Details94
20 Recalibration95
21 Service95
22 Type / Product Key96

Questions and Answers:

Need help?

Do you have a question about the HYDAC International CS 1000 Series and is the answer not in the manual?

HYDAC International CS 1000 Series Specifications

General

Brand	HYDAC International
Model	CS 1000 Series
Category	Accessories
Language	English

Related product manuals

CS1000 Series

108 pages

HYDAC International CS 1000 Series User Manual

Table of Contents

Questions and Answers:

HYDAC International CS 1000 Series Specifications

Related product manuals