HYDAC International CS1000 Series User Manual

CS1000 series
Contamination Sensor
Operating and Maintenance Instructions
English (translation of original instructions)
Valid from firmware versions V 2.40 up
Documentation no.: 3247149p

HYDAC International CS1000 Series Specifications

General

Housing material	Stainless steel
Protection class	IP 67
Temperature range	-25°C to +85°C
Electrical connection	M12x1, 4-pole
Output signal	4-20 mA

Summary

Safety and Product Overview

Safety Information and Instructions

Key instructions for proper and safe operation and handling of the CS.

Improper Use and Deviations

Details on improper use that may result in hazard to life and limb.

CS1000 Features and Restrictions

Describes CS1000 features and essential restrictions on its use.

Installation and Connections

Hydraulic Connection Types

Explains pipe/hose and flange connection types for the CS1000.

Fastening and Mounting

Guidance on fastening and mounting the CS1000 sensor.

Electrical Connection and Pin Assignment

Details on electrical connection, including plug pin assignments.

Operation and Settings

CS1000 Measurement Modes

Describes M1, M2, M3, M4, and SINGLE measurement modes.

Keyboard Operation and Functions

Explains how to operate the CS1000 using its keyboard and key functions.

PowerUp Menu Configuration

Details on performing basic settings in the PowerUp menu.

Analog Output and Technical Data

Analog Output Signals

Explains available analog output signals like SAE, ISO, NAS, and Temp.

SAE Cleanliness Class Output

Details SAE classes (A-D, A/B/C/D) and their output via analog signal.

Technical Data Summary

Provides key technical specifications for the CS1000 sensor.