What does 'not enough points' mean on HYDAC International Control Unit?
The message 'not enough points' on the HYDAC International Control Unit means that you've tried to print a graph, but the selected log doesn't have enough measurement values (at least 3) to display a graph. Instead, print the log as a list.
What does 'no logs stored !!' mean on HYDAC International Control Unit?
The message 'no logs stored !!' on the HYDAC International Control Unit indicates that you've attempted to print logs, but the memory is empty. To resolve this, perform new measurements.
What does 'Filter contaminated' mean on HYDAC International Control Unit?
The message 'Filter contaminated' on your HYDAC International Control Unit indicates that the internal protection filter for the flow control valve of the FCU is clogged. Replace the FCU filter element.
What to do if HYDAC International Control Unit displays 'ext. Input activated'?
If the HYDAC International Control Unit displays 'ext. Input activated' (specifically with the OF5C filtration unit), it means the clogging indicator of the OF5C is activated, indicating that the OF5C filter is clogged. Replace the OF5C filter element.
What does 'Internal printer not ready' mean on HYDAC International Control Unit?
If the HYDAC International Control Unit displays 'Internal printer not ready', it could be due to an empty paper roll or a damaged printer. Replace the paper roll with a new one. If the problem persists, ship the FCU to HYDAC for repair.
General| Brand | HYDAC International |
|---|---|
| Model | FCU 2110-5 |
| Category | Control Unit |
| Language | English |
To Next Page