Need help?Do you have a question about the Hydac EDS 3400 and is the answer not in the manual?
Primary functions including pressure monitoring and accumulator charging control.
Supplementary features like diagnostic outputs, communication, and display capabilities.
Description of the Standard I/O mode and its LED indicator behavior.
Description of the SDCI mode for digital communication and its LED indicator.
Guide for configuring the device using an IO-Link master.
Method for adjusting settings directly using the device's keys.
Instructions for parameter setting using the HYDAC HPG P1-000.
Instructions for parameter setting using the HYDAC ZBE P1-000 adapter.
Configures the two switching outputs for pre-charge monitoring or twopoint mode.
Defines the configurable measuring ranges and minimum differences for switching outputs.
Configuration options for the analogue output signal (4-20 mA or 0-10 V).
Overview of the main menu structure for device settings.
Detailed menu flow for accessing and modifying advanced device parameters.
How to enable or disable programming to protect settings.
Primary functions including pressure monitoring and accumulator charging control.
Supplementary features like diagnostic outputs, communication, and display capabilities.
Description of the Standard I/O mode and its LED indicator behavior.
Description of the SDCI mode for digital communication and its LED indicator.
Guide for configuring the device using an IO-Link master.
Method for adjusting settings directly using the device's keys.
Instructions for parameter setting using the HYDAC HPG P1-000.
Instructions for parameter setting using the HYDAC ZBE P1-000 adapter.
Configures the two switching outputs for pre-charge monitoring or twopoint mode.
Defines the configurable measuring ranges and minimum differences for switching outputs.
Configuration options for the analogue output signal (4-20 mA or 0-10 V).
Overview of the main menu structure for device settings.
Detailed menu flow for accessing and modifying advanced device parameters.
How to enable or disable programming to protect settings.
General| Type | Electronic Pressure Switch |
|---|---|
| Operating Temperature | -25°C ... +85°C |
| Protection Class | IP 65 / IP 67 |
| Housing Material | Stainless steel |
| Accuracy | ±1% of full scale |
| Process Connection | G 1/4" male |
| Connection | M12 connector |
To Next Page
