2 EDS 3400
Status: 2018-07- HYDAC INTERNATIONAL GMBH Part No.: 670000 E
Content
1 Safety Information 3
2 Disclaimer 3
3 Functions of the EDS 3400 3
3.1 MAIN FUNCTIONS 3
3.2 ADDITIONAL FUNCTIONS 4
4 Assembly 4
5 Control elements of the EDS 3400 5
6 Reading the digital display 6
7 Commissioning 7
8 Operation Modes 8
8.1 SIO MODE 8
8.2 SDCI MODE 8
9 Parameterisation 8
9.1 PARAMETERISATION VIA IO-LINK MASTER 8
9.2 MANUAL PARAMETERISATION ON THE DEVICE 9
9.3 PARAMETERISATION WITH HYDAC PROGRAMMING DEVICE HPG P1-000 9
9.4 PARAMETERISATION WITH HYDAC PROGRAMMING ADAPTER ZBE P1-000 9
10 Output settings 10
10.1 SWITCHING OUTPUTS 10
10.1.1 Setting of the switch point (SP2) -
Accumulator charge, twopoint mode 10
10.1.2 Setting of the pre-charge pressure monitoring 11
10.2 SETTING RANGES FOR THE SWITCHING OUTPUTS 11
10.3 ANALOGUE OUTPUT 11
11 Basic Settings 12
11.1 MAIN MENU 12
11.2 EXTENDED FUNCTIONS 13
12 Changing the Basic Settings 14
13
Resetting the peak values 14
14
Offset calibration 14
15
Program enable 15
15.1 CHANGING THE PROGRAM ENABLE 15
16 Error Messages 15
17
PIN connection 16
18
Technical Data 17
19
Order details 18
20
Accessories 19
20.1 FOR ELECTRICAL CONNECTION 19
20.2 FOR MECHANICAL CONNECTION 19
21 Instrument dimensions 21
To Next Page
Loading...
