First Steps HMG 4000
Edition 2016-03-08 - V01 R04 [15] Part No.: 669950
3.3 Switching device on and off
After switching on the HMG 4000 for the first time, follow the instructions on the display
and adjust the necessary basic settings on the "Welcome screen".
3.4 Updating firmware
To have the latest version of the HMG 4000 the firmware of the device needs to be
updated provided an update file is available.
Under certain circumstances, the settings saved in the HMG 4000 may no
longer be legible after installing an update.
Corresponding notices appear on the display before the update is executed.
If necessary, back up this data on a PC before starting the update.
Connect the power adapter to the HMG 4000 in order to guarantee a safe and
interruption-free power supply during the update process.
Detailed information on the firmware update can be found in chapter 16.4
"Software update"
To Next Page
Loading...
Need help?
General