~11~
1.Appliances and medical equipment close to the machine may be resulting in operational failure
due to interference.
2.Prohibit use of the equipment in the following environment
3.If there comes a failure, please shut down the power immediately, and send it to the distributor
or manufacturer for maintenance. Do not repair by yourself.
4.Exclusion of liability.
The Company is not responsible for the following circumstances:
(1)If fire, earthquake, war occurred;
(2)The fault of the user, operator error;
(3)
Damage caused by using other method(not included in the use manual).
(4)Operate without the manual's guide.
5.After using the machine for over 40 hours, please take off the dust filter and clean it (If have).
6.Do not make the machine close to the wall, keeping a 30CM space around for cooling.
――Hot and humid environment
――Dusty environment
――Environmental with much smoke or stream
Technical note:
Hardware structure of the machine parts, injection molded parts, and the majority of electronic components,
connectors meet the requirements of the EU and China RoHS directives.Only a few parts as the global technology
limitations that may affect product reliability, and not find a substitute for the toxic and hazardous substances, please
be assured to use, use under normal conditions will not cause health effects on users.
Toxic and hazardous substance in at least one homogeneous materials of the part exceeds the concentration limit
requirement described in SJ/T11363-2006.
Toxic and hazardous substance in all the homogeneous materials of the part is either below the concentration
limit requirement described in SJ/T11363-2006 or is not applicable because the part is not used.
Products to be discarded after use, Please treat in accordance with electronic and information products recovery,
re-use legal regulations.
Held onto the filter
with hands,pull it out
according to cursor.
after cleaning, push
it back.
Hazardous Substances or Elements Contained in the Product
Maintenance
Safety and Environmental Considerations
Part Name
Plastic parts
Metal structures
/decorations
Printed Circuit
Assembly
Power Line
Plug of Power
supply line
Relay
Buzzer
Remark
Toxic and Hazardous Substance or Element
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
To Previous Page
Loading...
