To Next PageTo Next Page
Need help?Do you have a question about the Hydreka HydrINS 2 Mini and is the answer not in the manual?
General| Manufacturer | Hydreka |
|---|---|
| IMU Type | MEMS |
| Heading Accuracy | 0.1 ° |
| Data Output Rate | 200 Hz |
| Power Supply | 9-36 VDC |
| Power Consumption | 5 W |
| Category | Navigation |
| Interfaces | Ethernet |
| Operating Temperature | -40 to 85 °C |
Configures settings for the digital channel of the HydrINS 2 probe.
Methods for transmitting programming data to the flow meter.
How to check data logger configuration and retrieve recorded data.
Steps to retrieve the current configuration from the flow meter.
Procedure for programming the HydrINS 2 / HydrINS 2 Mini flow meter.
Guide to using the advanced mode for programming HydrINS 2/Mini flow meters.
Monitoring flow data in real-time to detect system events like leaks.
Enabling and using the 4-20 mA outputs with Display C.
Detailed process for calculating and processing velocity profiles.
Configuring workspace and navigating HydrINS software menus.
Explanation of parameters displayed in the HydrINS software.
