To Next Page
D
Douglas JonesSep 2, 2025
What to do if Hydro-Gear ZT-3400 Lawn Mower Accessories bypass assembly is sticking?
- MmoorecharlesSep 2, 2025
If the bypass assembly on your Hydro-Gear Lawn Mower Accessories is sticking, repair or replace the linkage.
What to do if Hydro-Gear ZT-3400 Lawn Mower Accessories bypass assembly is sticking?
If the bypass assembly on your Hydro-Gear Lawn Mower Accessories is sticking, repair or replace the linkage.
What to do if Hydro-Gear ZT-3400 Lawn Mower Accessories has air trapped in hydraulic system?
To resolve air trapped in the hydraulic system of your Hydro-Gear Lawn Mower Accessories, purge the hydraulic system.
How to fix low engine speed on Hydro-Gear Lawn Mower Accessories?
To address low engine speed on your Hydro-Gear Lawn Mower Accessories, adjust to the correct setting.
What to do if Hydro-Gear ZT-3400 brake is partially engaged?
If the brake on your Hydro-Gear Lawn Mower Accessories is partially engaged, disengage the brake and replace any broken or missing brake return springs.
What to do if Hydro-Gear ZT-3400 unit operates in one direction only?
If your Hydro-Gear Lawn Mower Accessories unit operates in one direction only, you may need to repair or replace the linkage, drive belt, or pulley.
Why Hydro-Gear Lawn Mower Accessories unit is operating hot?
If your Hydro-Gear Lawn Mower Accessories unit is operating hot, ensure the oil level is at the proper level or change the oil.
What to do if Hydro-Gear ZT-3400 Lawn Mower Accessories unit is noisy?
If your Hydro-Gear Lawn Mower Accessories unit is noisy, ensure the oil level is at the proper level or change the oil. Also, check for and repair or replace any loose parts.
What to do if Hydro-Gear Lawn Mower Accessories vehicle does not drive or track straight?
If your Hydro-Gear Lawn Mower Accessories vehicle doesn't drive straight, check the vehicle tires and ensure they are inflated to the pressure suggested by the vehicle manufacturer. Another possible solution is to repair or replace the linkage.
General| Type | Hydrostatic Transaxle |
|---|---|
| Series | ZT-3400 |
| Input Speed (Rated) | 3600 RPM |
| Maximum Input Speed | 3600 RPM |
| Oil Type | 20W-50 motor oil |
| Application | Commercial Zero-Turn Mowers |
| Axle Shaft Diameter | 1.125 inches |
| Output Torque (Continuous) | 3400 in-lbs |
| Axle Diameter | 1.125 inches |
Covers essential safety guidelines for personal, tool, work area, and general servicing procedures.
