EasyManua.ls Logo

HYDRO HOME DHSO-100-BS User Manual

Default Icon
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
P0903 - 2020.12
DHSO-100-B
Simplex
Bibloc
Bypass ¾” M BSP
DHSO-100-BS
Simplex
Bibloc Small
Bypass ¾” M BSP
DHSO-100-M
Simplex
Monobloc
Bypass ¾” M BSP
EN
Installation & Operating Guide
Page 2
WATER SOFTENER - SIMPLEX
FR
Guide d’Installation & Utilisation
Page 8
ADOUCISSEUR D’EAU - SIMPLEX
DE
Installation
& Bedienungsanleitung
Seite 14
WASSERENTHÄRTER - SIMPLEX
NL
Installatie & Bedieningshandleiding
Pagina 20
WATERONTHARDER - SIMPLEX
Question and Answer IconNeed help?

Do you have a question about the HYDRO HOME DHSO-100-BS and is the answer not in the manual?

HYDRO HOME DHSO-100-BS Specifications

General IconGeneral
BrandHYDRO HOME
ModelDHSO-100-BS
CategoryWater Dispenser
LanguageEnglish

Summary

Precautions & Introduction

General Precautions

General precautions and warnings for using the guide and device.

Intended Use of the Device

Specifies the device's purpose for removing hardness ions from cold drinking water.

Installation of the Device

Outlines the basic requirements for installing the water softener device indoors.

Functioning

Explains the ion exchange principle and regeneration process of the water softener.

Scope of Delivery & Main Components

Lists the main components included with the device and their identification.

Installation

Preparation for Installation

Steps to prepare the device and location before installation begins.

Drain and Overflow Connections

Instructions for correctly connecting the drain and overflow hoses to the sewerage system.

Inlet and Outlet Connections

Connects water supply to inlet and internal piping to outlet, respecting flow direction.

Pressurizing and Leak Check

Procedures for flushing the system, purging air, and checking for leaks after installation.

Start-up & Settings

Start-up and Manual Regeneration

Steps for filling brine cabinet and initiating the first regeneration cycle.

Inlet Hardness Regulator Adjustment

How to measure and set the inlet hardness regulator based on water analysis.

Hardness Blending Regulator Adjustment

How to adjust the hardness blending regulator to achieve desired residual hardness.

Maintenance

Basic Inspection Routine

Regular checks to ensure device functions properly and identify leaks.

Bypassing the Device

Instructions on how to put the device into bypass or service mode using the bypass valve.

Salt Refilling Procedure

Guidance on checking and refilling the brine cabinet with regeneration salt.

Cleaning the Device

Instructions for cleaning the exterior of the device using gentle methods.

Sanitizing Recommendations

Recommendations for sanitizing the device, especially after contact with unknown water quality.

Related product manuals