EasyManua.ls Logo

HYDRO HOME DHSO-100-M User Manual

HYDRO HOME DHSO-100-M
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
P0903 - 2020.12
DHSO-100-B
Simplex
Bibloc
Bypass ¾” M BSP
DHSO-100-BS
Simplex
Bibloc Small
Bypass ¾” M BSP
DHSO-100-M
Simplex
Monobloc
Bypass ¾” M BSP
EN
Installation & Operating Guide
Page 2
WATER SOFTENER - SIMPLEX
FR
Guide d’Installation & Utilisation
Page 8
ADOUCISSEUR D’EAU - SIMPLEX
DE
Installation
& Bedienungsanleitung
Seite 14
WASSERENTHÄRTER - SIMPLEX
NL
Installatie & Bedieningshandleiding
Pagina 20
WATERONTHARDER - SIMPLEX
Question and Answer IconNeed help?

Do you have a question about the HYDRO HOME DHSO-100-M and is the answer not in the manual?

HYDRO HOME DHSO-100-M Specifications

General IconGeneral
CategoryWater Dispenser
ModelDHSO-100-M
ColorWhite
Voltage220V
Dimensions30 x 30 x 40 cm

Summary

PRECAUTIONS & INTRODUCTION

General Precautions and Reading Guide

Emphasizes careful reading of the guide for warranty, safety, and proper use. Keep guide accessible.

Scope of Delivery & Main Components

Lists and illustrates all the essential parts included with the water softener device.

Intended Use of the Device

Device is designed to remove hardness ions from cold drinking water; it does not remove other contaminants.

Installation of the Device

Details requirements for device placement, environmental conditions, and protection against frost.

Device Functioning

Explains the ion exchange process for softening water and the automatic regeneration cycle.

INSTALLATION

Preparation

Steps for determining orientation, removing covers, and positioning the support plate for installation.

Inlet and Outlet Connections

Instructions for connecting water supply to the inlet and internal piping to the outlet, respecting flow direction.

Drain and Overflow Connections

Guidance on using specific hoses for drain/overflow and connecting to sewerage, including air gap requirements.

Pressurizing the System

Procedure for safely pressurizing the system, purging air, and checking all hydraulic connections for leaks.

START-UP & SETTINGS

Initial Start-Up and Regeneration

Guide to filling brine cabinet, adding water, and initiating the first full regeneration cycle.

Inlet Hardness Regulator Adjustment

How to measure incoming water hardness and adjust the inlet hardness regulator for optimal performance.

Hardness Blending Regulator Adjustment

Procedure for setting the blending regulator to control the residual hardness of treated water.

MAINTENANCE

Basic Inspection Routine

Monthly checks for drain hose flow, overflow, leaks, and adjusting hardness regulators if necessary.

Bypassing the Device

Instructions on how to use the integrated bypass valve to isolate the device from the water piping.

Salt Refilling Procedure

Guidance on checking the salt level in the brine cabinet and refilling with regeneration salt as needed.

Related product manuals