Need help?Do you have a question about the hydro-s A5/32 and is the answer not in the manual?
Provides necessary product information for use and maintenance.
Details the swimming pool heat pump's efficiency and cost savings compared to traditional heating.
Highlights key benefits like ecological heating, titanium heat exchanger, multiple functions, and reliable operation.
Covers critical warnings and precautions for safe installation and operation.
Provides general information for better understanding of the installation process.
Provides general information for better understanding of the installation conditions.
Specifies requirements for the installation location, including clearances and ventilation.
Offers advice on optimal placement to avoid noise, vibrations, and environmental exposure.
Explains how to connect the heat pump to the filtration circuit using a by-pass for regulation.
Details electrical supply requirements, cable sizing, and routing guidance.
Step-by-step guide for initial operation, including filter pump, power connection, and monitoring.
Shows the controller interface and explains its basic display and buttons.
Explains the function and operation of each button on the controller.
Describes how to adjust the set temperature (SPT) and its adjustable range.
Explains how to query parameters like water temperature and ambient temperature.
Details how to enter parameter setting mode and lists adjustable parameters and their values.
Explains various protection mechanisms like under-temperature and sensor faults.
Lists fault codes, their descriptions, and corresponding error indicators.
Provides the wiring diagram for specific models, illustrating component connections.
Presents the wiring diagram specific to A10/32 and A13/32 models.
Advises on product improvements and refers to the nameplate for specifications.
Details cleaning procedures for the heat exchanger's pipe system, requiring a technician.
Explains how to clean the finned heat exchanger, ventilator, and condensate outflow.
Provides guidance on draining the water circuit to prevent frost damage during winter.
Emphasizes safety, inspection, and reading before contacting a dealer.
Lists checks for when the heat pump fails to start.
Outlines checks for failure to reach set temperature.
Discusses the equipment's greenhouse gases and handling requirements.
Details legal requirements for dismantling, refrigerant treatment, and disposal options.
To Next Page
General
