Need help?Do you have a question about the hydro-s A13/32 and is the answer not in the manual?
Follow instructions to prevent injury, comply with regulations, and ensure correct voltage.
Avoid self-installation; ensure secure mounting and proper wiring to prevent fire or shock.
Avoid installing near gas, ensure proper drainage, and shut off power before cleaning.
Connect to filtration with a by-pass for water flow regulation and maintenance.
Ensure electrical supply matches appliance specs and use correctly sized cables.
Sequence for starting the unit: turn on filter pump, connect power, check air, and allow 24hr operation.
Details on setting operating mode, hysteresis, temperature limits, and shutdown.
Explanation of under-temperature, sensor fault, and power failure protections.
Checks for supply voltage and correct operation settings when the unit fails to start.
Checks for operating conditions, airflow obstructions, and water pipe blockages.
To Next Page
General
