Hydropool SS14ES - So Stride Floor System; Care of Stainless Steel

59
SOFT STRIDE FLOOR SYSTEM
The exclusive So Stride Floor System is available as a standard feature on the 13FFP Aquaplay and the Execuve Series
models to provide a beer grip, tracon and comfort on both the steps and floor of the swim spa. Making your swim spa safe
and easy to use while geng in and out.
Care & Maintenance Recommendaons:
· So Stride Floor System cleans easily with soap, hot water and a brush (so to medium bristle sffness). Chlorine/bleach
and water mixture, isopropyl rubbing alcohol or other household cleaners such as SoScrub, Simply Green and 409 can
be used to clean the pads.
· Be sure any soap or cleaning product is thoroughly rinsed from the pads and swim spa shell and this residue is removed
before refilling the spa to prevent foaming.
· Always promptly aend to and clean any noceable stains.
Never:
· Allow coloured an-freeze to puddle or dry on the mat.
· Allow stains to develop without promptly being aended to and cleaned.
· Clean with acid based cleanly products.
· Use acetone or mineral spirits on the pads or swim spa shell as damage caused to the swim spa shell from these
chemicals will void the warranty.
CARE OF STAINLESS STEEL
Hydropool uses stainless steel in a number of our swim spas. Its lasng beauty and resistance to corrosion make it an excel-
lent material for handrails and jet faces.
With the proper care it will keep its luster for many years. All stainless steel can corrode given the right circumstances so we
have provided a guide to help you keep the stainless components in your swim spa looking nice.
Stainless steel derives its ability to resist corrosion by forming a very thin transparent coang on the surface when exposed to
oxygen. This coang can be damaged by abrasive materials such as steel wool, sand paper, and other cleaning materials that
are abrasive. Chlorine salts, sulfides or other rusng metals can also erode this thin coang exposing the metal to corrosion.
The best defense to combat corrosion on stainless steel components in your swim spa is to make sure that it is kept clean and
free of any chemical build up.
Always:
· Clean frequently with fresh, clean water.
· Remove any rust spots as soon as they appear with vinegar or a brass, silver, or chrome cleaner.
· Use a good car cleaning wax for extra protecon
Never:
· Clean with mineral acids or bleaches.
· Clean with steel wool or any other abrasive material.
· Leave in contact with iron, steel or other metals.
· Close the cover immediately aer adding chemicals to the water.
NOTE: Failure to take proper care of the stainless steel components could result with them rusng. Rusng is not covered
by the warranty.
Do not cover the swim spa for 15 minutes aer adding chemicals as the off gas can cause unwarranted damage. Larger
dosages can require longer lengths of me to off gas. It is recommended to check the swim spa water more frequently to
allow small dosages to be added as necessary versus large dosages being added less oen.