HydroQuip 6000 Series - User Manual

To ensure that the system is installed properly,
provide your electrician with these instructions.
INSTALLATION
INSTRUCTIONS
Universal
Air Series
!! NOTE !!
Covers the following models:
9000 Series
6000 Series

Summary

Installation Instructions

Electrical Installation and Connections

Electrical Installation Requirements

Covers NEC compliance, GFCI, dedicated circuits, and conductor types for spa electrical setup.

Option 1: 15 A GFCI Plug Connection

Details the installation of a 15A GFCI plug-end connection for portable spas.

Option 2: GFCI Installed in Main Service Panel

Explains how to install a GFCI breaker in the main service panel for spa power.

Option 2 a: Subpanel GFCI Installed

Covers installing a GFCI breaker in a subpanel for spa electrical connection.

Electrical Installation Details

Provides specific guidance on GFCI/breaker sizing, wiring, and bonding requirements.

GFCI Wiring Detail

System Configuration and Connection

Universal Voltage and Component Configuration

System Startup

System Startup Procedures

Troubleshooting

Nothing Operates; Water Flow Issues

Solutions for common problems like no power, low water flow, or surging water.

Pump and Blower Operation Issues

Therapy Jet, Light, and Water Leak Issues

Heating Issues and GFCI Trips

Special Considerations

HydroQuip 6000 Series Specifications

General

Brand	HydroQuip
Model	6000 Series
Category	Control Systems
Language	English