Hydrotec HydroDOS HD550G

Need help?

Do you have a question about the Hydrotec HydroDOS HD550G and is the answer not in the manual?

Summary

Operation and Maintenance Manual

Chapter I - General Information

2. Safety Information

Covers general safety guidelines and warnings for system operation.

3. Special Safety Information for Chlorine Dioxide Units

Highlights safety aspects unique to chlorine dioxide system operation.

Chapter II - Transport and Storage - Chlorine Dioxide Unit

Transport and Storage Guidelines

Chapter III - System Description; Technical Data

Chapter IV - Installation and Assembly

2. Installation Site

Specifies requirements and considerations for selecting the system's installation location.

4. Hydraulic Connections

5. Electric Connections

Chapter V Operation Dosing Pumps

Installation and Electrical Connections

Startup and Shutdown Procedures

Step-by-step guide for starting, stopping, and failure remedies.

Chapter VI - Chlorine Dioxide Measuring; Control

Chapter VII Electronic Control

Measuring Device and Troubleshooting

Chapter VIII Start-up and Operation Procedures

Pre-Startup Checks and Commissioning

System Startup, Chemical Replacement, and Shutdown

Guides on starting, replacing chemicals, and safely shutting down the system.

Chapter IX Control and Maintenance

2. Control and Inspection by Operator

Outlines daily and weekly inspections for the operator.

3. Maintenance

Covers maintenance requirements and procedures for the system.

Appendices 2: Calculation Chlorine Dioxide Production

Appendices 5 - Behaviour in Emergency Case

Protective Measures - Unintended Release of Chlorine Dioxide

Specifies protective measures during accidental release of chlorine dioxide.

At Spilling

Outlines procedures for handling chemical spills.

First-Aid Measurement

Details first aid procedures in case of chemical contact or inhalation.

Fire Combat