Hydrover Oxymatic - Page 5

User Guide Oxymatic Basic
Rev.Apr 2013

Hydrover Water Solutions S..L.U.
5

Copper ion concentration (ppm) required for the elimination of some micro organisms:
Copper (ppm) Copper (ppm)
Chlorophyceane Protozoa Bursaria
Cladophora 0.50 Ceratium 0.33
Closterium 0.17 Chlamydomonos 0.50
Coelastrum 0.05 - 0.33 Cryptomonas 0.50
Conferva 0.25 Dinobryan 0.18
Desmidium 2.00 Euglena 0.50
Draparnaldia 0.33 Glenodinium 0.50
E. COLLI 0.20 Mallomonas 0.50
Entomgplprn 0.50 Nematodes 0.70
Eudorins 10.00 Peridinium 0.50 - 2.00
Hydrodictyon 0.10 Synura 0.12 - 0.25
Microspora 0.40 Uroglena 0.05 - 0.20
Palmella 2.00 Fungus
Pandorina 10.00 Leptornitus 0.40
Raphidiiun 1.00 Sappolagnia 0.18
Scenedesmus 1.00 Miscellaneous
Spirogyra 0.12 Chara 0.10 - 0.50
Starastrom 1.50 Nitella, flexilis 0.10 - 0.18
Ulothrix 0.20 Potamogeton 0.30 - 0.80
Volvox 0.25 Diatomeas
Zygnema 0.60 Asterionella 0.12 - 0.20
- - Fragilaria 0.25
- - Melosira 0.20
- - Navicitia 0.07
- - Nitzchia 0.50
- - Synedra 0.36 - 0.50
- - Stepbanodiwus 0.33
- - Tabellaiia 0.12 - 0.50
TABLE 2: Destruction of microorganisms by the system OXYMATIC
The Water Check National Testing Laboratories (Ypsilanti, MI), Spectrum Labs (Minneapolis, MN) and MN
Department of Health have observed the destruction of E Coli from 0.1 to 2.0 ppm at pH ranges from 6.5 to 8.0.
In addition municipal public health inspectors and private companies have conducted additional investigations
into E Coli and have found that copper ion in pipelines has stability until fixed. At present this solution has
proven to be the market leader for the removal of coli forms and E.Coli.