Hydroworks 8619066 - User Manual

To Next Page

1 OF 2

12V DC 2-Button Hand-Held Wireless Remote Control

Instruction Manual

Suitable for linear actuators and other 12V DC applications that require a 10A polarity reversing

wireless remote control switch.

Features

• Wireless remote control

• 50 ft. wireless range

• 50% duty cycle

• Max. output of 10 Amps

Each Kit Contains the Following Components:

Note: 2-AAA batteries are required for the remote control

Installation:

Follow the wiring diagram below to connect to the 135 lb. and 270 lb. linear actuators. Inspect all

the wiring to make sure the connections are properly made, you have a good quality ground and

there is a 10(Amp) fuse installed.

Wiring Diagram:

12V DC 2-Button Hand-Held Wireless Remote Control

Instruction Manual

Item No.: 8619066

10 Amp

Fuse

Need help?

Do you have a question about the Hydroworks 8619066 and is the answer not in the manual?

Summary

Details key features like wireless range, duty cycle, and max output for the 12V DC remote.

Lists the items included in the wireless remote control kit and notes battery requirements.

Guidance on connecting the wireless remote to linear actuators, emphasizing proper wiring and grounding.

Visual representation of the electrical connections for the 12V DC wireless remote control system.

Step-by-step guide on pairing the wireless remote control with its wired base unit.

Instructions on how to use the buttons to extend or retract the connected actuator.

General