HYLA GST - Page 23

1. 2. 3.
8. 9.
1. 2.
3.
7.
10.
4. 5. 6.
HYLA GST NIMBUS WET CLEANING SYSTEM
Components
44 HYLA GST NIMBUS Wet Cleaning System - Components HYLA GST NIMBUS Wet Cleaning System - Preparation for use 45
PREPARATION FOR USE
1. NIMBUS Fresh-water Tank
2. NIMBUS Hose with trigger
3. NIMBUS Fresh-water Tube
4. NIMBUS Hard Floor Nozzle
5. NIMBUS Carpet Nozzle
6. NIMBUS Upholstery Nozzle
7. NIMBUS Spray Nozzle
8. HYLA Cleanser for hard oor
(17 . oz.)
9. HYLA Cleanser for carpeted
oor and upholstery (17 . oz.)
10. Telescopic Wand with Tube Canal
• Fill the NIMBUS Fresh-water tank with maximum of 0.9 gallon of water (max 104°F).
• Add two capfuls of genuine HYLA cleanser.
• Fill HYLA Water Pan with approximately ¼ gallon of water.
• Remove the HYLA exhaust grid and mount the NIMBUS fresh-water tank onto
the Motor Unit Assembly.
• Connect the NIMBUS Hose to the Motor Unit Assembly and connect the integrated
Fresh-water Tube to the NIMBUS Fresh-water Tank Valve.