Need help?Do you have a question about the HYOSUNG GT 125 R and is the answer not in the manual?
General| Brand | HYOSUNG |
|---|---|
| Model | GT 125 R |
| Category | Motorcycle |
| Language | English |
Provides essential guidelines for proper motorcycle break-in procedures.
Explains the meaning and usage of warning, caution, and note symbols in the manual.
Offers precautions and advice for safe motorcycle riding practices and operator safety.
Details the type and octane rating of gasoline recommended for the motorcycle.
Specifies recommended engine oil grades, viscosity, and capacity for optimal performance.
Explains the function and operation of the motorcycle's ignition switch positions.
Details the importance of ignition keys and provides space to record the key number.
Describes the function of the clutch lever for disengaging the drive to the rear wheel.
Explains how to use the pass switch for operating the high beam.
Details the operation of the dimmer switch for changing headlamp light.
Instructs on using the turn signal switch for indicating direction changes.
Explains the function of the horn switch.
Describes the engine stop switch for immediate engine shutdown in emergencies.
Details the application and operation of the front brake lever.
Explains how the throttle grip controls engine speed.
Covers the operation of the headlight switch for different lighting modes.
Guides on adjusting the footrest position for optimal riding comfort and control.
Explains the optional gearshift link rod for adjusting riding position.
Details precautions and procedures for safely refueling the motorcycle's fuel tank.
Provides instructions for checking the engine oil level using the sight glass.
Outlines the procedure and intervals for changing engine oil and filter.
Explains the necessary checks and procedures before starting the motorcycle engine.
Specifies maximum throttle openings for different mileage intervals during break-in.
Emphasizes the importance of varying engine speed for proper break-in.
Guides on breaking in new tires for optimal performance and safety.
Stresses sufficient idling time to ensure oil circulation before riding.
Highlights the critical importance of the first 1,000km service for longevity.
Identifies key lubrication points for smooth operation and extended motorcycle life.
Lists the tools included in the kit for periodic maintenance.
Instructions for checking for oil leaks from the crankcase and oil hose.
Guides on inspecting the fuel hose for damage and leaks.
Instructions for checking for gasoline leaks from various components.
Advises on cleaning rubber caps of cables during washing.
Instructions for inspecting exhaust pipe and muffler joints for looseness.
Details the inspection of maintenance-free battery solution levels.
Explains how to check and replenish brake fluid levels in the master cylinder.
Guides on checking and filling the front brake fluid reservoir.
Guides on checking and filling the rear brake fluid reservoir.
Details recommended tire pressures for solo and dual riding conditions.
Provides instructions for checking tires for visible damage like cracks and cuts.
Advises on inspecting the rear axle shaft and nut for looseness.
Outlines the procedure for replacing the front tire.
Outlines the procedure for replacing the rear tire.
Guides on performing initial checks when the engine fails to start.
Lists common causes and checks for engine stalling issues.
Instructs owners on how to report vehicle safety defects to NHTSA and the manufacturer.
To Next Page
