To Next PageTo Next Page
Need help?Do you have a question about the HYOSUNG SD 50 and is the answer not in the manual?
General| Engine Stroke | 4-Stroke |
|---|---|
| Displacement | 49.5 cc |
| Fuel System | Carburetor |
| Transmission | Automatic |
| Front Suspension | Telescopic fork |
| Rear Suspension | Single shock |
| Front Brake | Disc |
| Rear Brake | Drum |
| Fuel Capacity | 5.5 liters |
| Tires (Front) | 90/90-10 |
| Tires (Rear) | 90/90-10 |
| Engine Type | Single Cylinder |
| Starting System | Electric and kick start |
| Engine | 49cc, Air Cooled, 4-Stroke |
Explains the critical nature of the first 1000km for engine longevity.
Defines warnings as relating to rider safety.
Defines cautions as relating to machine damage.
Defines notes as providing supplementary information.
Guidelines for safely installing motorcycle accessories.
General advice for safe motorcycle operation.
Emphasizes the critical importance of head protection.
Recommends appropriate clothing for rider safety.
Recommends reviewing pre-ride inspection procedures.
Advises knowing the bike and riding within skill limits.
Precautions for riding in adverse weather conditions.
Details the location of frame and engine serial numbers.
Labels and identifies various parts of the motorcycle.
Describes gauges and indicator lights.
Explains ignition switch positions and functions.
Operation of horn, turn signal, and dimmer switches.
Controls for headlights and other lights.
Instructions for accessing storage compartments.
How to use the integrated helmet holder.
Steps and precautions for adding gasoline.
Instructions for checking and adding engine oil.
Guidance on the type of gasoline to use.
Procedures for starting the engine.
Steps to begin riding from a standstill.
How to control speed and operate brakes.
Procedures for safely stopping and parking the motorcycle.
Guidelines for the initial 1000km.
Checks for levers, fluid, and pads.
Checks for pressure, tread, cracks, and cuts.
Checks for lights, mirrors, reflectors, and plates.
Schedule for lubrication and engine component checks.
Maintenance for chassis, front fork, brakes, and tires.
Service for air cleaner, battery, oil, and fuel systems.
Adjusting brake lever and checking/replacing fuses.
Cleaning terminals and servicing air filter.
Technical data on size, engine, and transmission.
Technical data on chassis, electrical, and fluid capacities.
Rules against tampering and engine maintenance for emissions.
