HyperChiller EBC-1023 Series - Initial Assembly Instructions; Component Preparation and Assembly; Freezing the HyperChiller

INITIAL ASSEMBLY INSTRUCTIONS
1. Fill small stainless steel cup
with water up to the indented
mark (1a), and twist on to the
lid.
2. Fill large stainless steel cup
with water up to the indented
mark (2a), and empty contents
into the black Hyperchiller
cup.
3. Twist empty large stainless
steel cup on to the lid.
4. Twist lid assembly to black
Hyperchiller cup, and place
upright in the freezer until
frozen solid, minimum 12-
hours. (Avoid overfilling to
prevent cracking).
3
Questions? We're here to help! Visit: hyperchiller.us for support on this product.
2