Hyperkin RETRON HD - Setting Up the RetroN HD; Setting Up the RetroN HD via HD Cable

Thank you for purchasing the RetroN® HD Gaming System. For your safety and the
safety of others, please carefully read the instruction manual before using this product.
Setting Up the RetroN® HD
Setting Up the RetroN® HD via HD Cable
1. Insert the HD cable into the OUTPUT PORT on the RetroN® HD.
2. Insert the other end of the HD Cable into the HD input on your HDTV.
3. Insert the MICRO USB CABLE into the MICRO USB PORT on the RetroN® HD.
4. Insert the other end of the MICRO USB CABLE into a power source. If AC
adapter is not included, we strongly advise you use a 5 Volt 1 Amp USB
wall AC Adapter.
5. Plug the AC adapter into a power outlet.
1