Hyperkin SUPABOY S - Using SupaBoy S Controllers

USING CONTROLLERS
10
To play games using the controller ports of the SupaBoy S:
1. Insert a controller into CONTROLLER PORT 1.
2. To play with two controllers with the SupaBoy S, insert a controller into CONTROLLER PORT 1,
then insert the other controller into CONTROLLER PORT 2.
Note: This can be done while the SupaBoy S is ON or OFF. Also, when the controller is plugged into
Controller 1, the DIRECTIONAL PAD and the face buttons on the SupaBoy S system will be disabled
until the controller is unplugged from CONTROLLER PORT 1.
CONTROLLER 1 CONTROLLER 2