Need help?Do you have a question about the HYPERVOLT Go 2 and is the answer not in the manual?
General| Weight | 1.5 lbs |
|---|---|
| Battery Life | Up to 3 hours |
| Motor | Brushless high-torque 40W motor |
| Bluetooth | No |
| Amplitude | 10 mm |
| Pressure Sensor Technology | No |
| Warranty | 1 year |
| Speeds | 3 speeds |
| Attachments | 2 (Flat, Bullet) |
| Noise Level | QuietGlide™ technology |
Identifies the head attachment, grip/handle, and battery level indicator (LED band) from the side.
Identifies the speed indicators, power button, and charging port from the rear.
Instructions to download the Hyperice App for guided routines, progress tracking, and tips from pros.
Activate your warranty and ensure easy returns or repairs by registering your product online.
Select the desired head attachment and insert it firmly into the opening.
Turn the Hypervolt Go 2 ON by holding the power button for two seconds until the LED indicator illuminates.
Change speeds (1-3) by pressing the power/speed button; white lights indicate the current speed.
Full charge indicated by a green, fully illuminated LED band. Use only the provided Hyperice charger.
Wipe with a damp cloth when OFF and unplugged; store in a clean, cool, dry place away from sunlight.
Get award-winning support from specialists for well-being and guidance on Hyperice products.
To Next Page
