EasyManua.ls Logo

HYPERVOLT Home 2.0 - CT Clamp Installation and Function; RCD Protection Requirements; PEN Fault Protection; Overheating Sensing

HYPERVOLT Home 2.0
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
6. The vehicle charges at a lower power than expected
Check the specication of your vehicle make and model and verify
the maximum power gures for AC Mode 3 charging. Some vehicles
have a maximum charging power of less than what the Hypervolt
Home can deliver: 32A. If the vehicle always charges at a lower power
than specied for its make and model, and has never charged at a
higher power, check whether a power limitation has been enabled
during your installation.
5. The charging time is greater than expected
When a vehicle’s charging session is almost complete it is normal for
the charging speed and power to begin to decrease.
Check your vehicle’s dashboard for an indication of the charging
power and whether it is at the level you expect it to be.
What to do if ...
Troubleshooting

Other manuals for HYPERVOLT Home 2.0