21
Technical Sheet
Product Information
Model
Hypervolt Home
Single Phase, 7kW AC
Tethered, IEC 62196/Type 2 OR SAE J1772/Type 1
5 or 7.5 Meters
Mode 3 (EN/IEC 61851)
Connection Capacity
Charging Connector
Tethered Cable Length
Charging Protocol
Electrical Properties
7kW, 32A@230V AC
230 ± 10% V AC
50 Hz
32 A
Internal overcurrent protection (software) plus
MCB protection at source
Internal 6mA DC fault current detection
(compliant to BS 7671:2018)
AC Charging Output
Input Voltage
Input Frequency
Input Current (max)
Overcurrent Protection
RCD Protection
Charging power may vary based on vehicle
make and model as well as electrical installation
setup.
Power and energy monitoring as standard;
optional MID grade metering is available.
Energy Monitoring
To Next Page
Loading...
