HyperX Armada 27 User Manual

3 mm
5 mm
M4 x L10
1
OR
Drill a hole in the desktop.
2
1
15 – 50 mm (0.6” – 2.0”)
15 – 60 mm
(0.6” – 2.4”)
Secure the grommet mount to the pole using the four screws.
Then secure the stand to the desk.
2
1
1
2
3 mm
4
3
1
2
3 mm
7
8
9
OR
10
11
2
3
4
5
6
1
2
2
1
2
1
+
LB
kg
–
LB
kg
+
LB
kg
–
LB
kg
3 mm
5 mm
1
2
Remove the preinstalled mounting clamp.
Color Side 1:
CMYK + Pantone 186C
+ MATTE AQ
Flat size:
16.5 x 21.25 in. (419.1 x 539.75 mm)
Fold 1:
5-panel accordion
Color Side 2:
CMYK + Pantone 186C
+ MATTE AQ
Finished size:
16.5 x 4.25 in. (419.1 x 107.95 mm)
MAXIMUM RESOLUTION: 2560 × 1440 @ 144 Hz
2560 × 1440 @ 165 Hz (DP)

HyperX Armada 27 Specifications

General

Screen Size	27 inches
Resolution	2560x1440 (QHD)
Panel Type	IPS
Response Time	1 ms (GtG)
Brightness	400 nits
Contrast Ratio	1000:1
VESA Mount	100 x 100 mm
Color Gamut	95% DCI-P3
Stand Adjustability	Height, Tilt, Swivel, Pivot
Speakers	No
Connectivity	DisplayPort, HDMI
Adaptive Sync	NVIDIA G-SYNC Compatible
HDR	HDR400
Ports	1x DisplayPort 1.4

Summary

Installation Guide

Desktop Preparation

Drill hole in desktop and remove preinstalled mounting clamp.

Mounting the Stand

Secure grommet mount to pole and attach stand to desk.

Monitor Arm Assembly

Connect the monitor to the arm and adjust positioning.

Support, Software, and Safety

Customer Support and NGENUITY Software

Contact HyperX support and download the NGENUITY software for assistance.

Important Safety Warnings

Key safety precautions for electrical shock and physical injury.

Regulatory and Environmental Information

Access compliance and environmental details via QR code or website.