Need help?Do you have a question about the HyperX Cloud II Wireless HHSC2X-BA-RD/G and is the answer not in the manual?
General| Headset Type | Over-ear |
|---|---|
| Type | Wireless |
| Wireless | Yes |
| Driver Size | 53mm |
| Frequency Response | 15 Hz - 25 kHz |
| Impedance | 60Ω |
| THD | < 2% |
| Sound Pressure Level | 104 dBSPL/mW at 1 kHz |
| Microphone | Yes |
| Surround Sound | 7.1 Virtual Surround Sound |
| Connection Type | USB |
| Wireless Range | Up to 20m |
| Battery Life | 30 hours |
| Form Factor | Over-ear |
| Color | Red |
| Microphone Type | Noise-canceling |
| Microphone Frequency Response | 50Hz – 18kHz |
| Weight | 300g |
| Microphone Sensitivity | -39dBV (0dB=1V/Pa, at 1kHz) |
Identifies headset and accessory components using lettered labels A through L.
Details the technical specifications of the headset drivers, impedance, type, and weight.
Details the technical specifications of the microphone, including element type, polar pattern, and sensitivity.
Provides information on the headset's battery life and wireless operating range.
Connect the USB adapter, power on the headset, and access Windows sound settings.
Configures the headset as the input and output device and sets volume control on PlayStation 4.
Explains the LED status for pairing, searching, and battery levels.
Details the functions of the Power/7.1 Surround Sound button and Mic mute/monitoring button.
Describes how to use the volume wheel and includes a hearing damage warning.
Explains how to charge the headset using the provided USB charge cable.
Provides the URL to download the NGENUITY software for headset customization.
Step-by-step guide to manually pair the headset and USB adapter if automatic pairing fails.
To Next Page