Need help?Do you have a question about the HyperX Cloud III and is the answer not in the manual?
General| Impedance | 64 Ω |
|---|---|
| Sound Pressure Level | 100 dBSPL/mW at 1 kHz |
| Microphone Type | Electret condenser microphone |
| T.H.D. | < 2% |
| Frequency Response | 10Hz - 21kHz |
| Microphone Frequency Response | 50Hz - 18kHz |
| Microphone Sensitivity | -42dBV (1V/Pa at 1kHz) |
| Microphone Polar Pattern | Noise-cancelling |
| Connection | 3.5mm plug (4 pole) |
Button to mute/unmute the microphone.
Port for connecting the microphone.
Wheel to adjust the volume level.
Microphone that can be attached or detached.
LED indicator for microphone mute status.
USB device for wireless connection.
Adapter for USB-C to USB-A connections.
Step-by-step guide for configuring the headset on a PC.
Setting the HyperX Cloud III as default playback and recording device.
How to use the mic mute button and its LED indicator.
Instructions for adjusting the volume using the scroll wheel.
Information on downloading and features of the NGENUITY software.
Contacting support and finding user manuals for setup issues.
To Next Page