HyperX Cloud III Wireless User Manual


ENGLISH
Overview
A - Mic mute / mic monitoring button
B - Status LED
C - Power button
D - USB-C charge port
E - Microphone port
F - Volume wheel
Usage
1. Connect the USB wireless dongle to your device
2. Power on the headset
Setting up with PC
Right click speaker icon > Select Open Sound settings > Select Sound control panel
Playback Device
Set Default Device to “HyperX Cloud III Wireless”
Recording Device
Set Default Device to “HyperX Cloud III Wireless”
Setting up with PlayStation 5
Go to the home page and select Settings > Sound
Microphone
• Input Device: USB Headset “HyperX Cloud III Wireless”
Audio Output
• Output Device: USB Headset “HyperX Cloud III Wireless”
• Output to Headphones: All Audio
Status LED
Power button
• Power on/o - Hold button for 3 seconds to power headset on/o
• Battery level status – Press button to see the battery level status on the status LED
o The status LED will automatically turn o to conserve battery life
Mic mute / mic monitoring button
• Mic mute toggle - Press button to turn the mic mute on/o
• Mic monitoring toggle – Hold button for 3 seconds to toggle mic monitoring
on/o
Volume wheel
Scroll up and down to adjust volume level
Charging
It is recommended to fully charge your headset before rst use.
HyperX NGENUITY Software
Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY
software features include:
• DTS Headphone:X*
• Adjustable auto shut-o behavior
• Battery level indicator
*PC only
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at hyperx.com/support
WARNING: Permanent hearing damage can occur if a headset is used at high
volumes for extended periods of time.
STATUS
Pairing
Searching
Connected
(Battery
Level)
LED
Flashing green and red every 0.2s
Slow breathing green
90% — 100%: Solid green for 5s
10% — 90%: Blinking green for 5s
< 10%: Blinking red for 5s
CHARGE STATUS
Fully Charged
10% — 99%
< 10%
STATUS LED
Solid green
Breathing green
Breathing red
G - Detachable microphone
H - Microphone mute LED
I - USB wireless dongle
J - Dongle status LED
K - Pairing pin hole
L - USB-C to USB-A adapter
M - USB charge cable

HyperX Cloud III Wireless Specifications

General

Connection Type	Wireless
Microphone Type	Electret condenser microphone
Battery Life	Up to 120 hours
Headphone Sensitivity	100 dBSPL/mW at 1 kHz
Wireless Range	Up to 20 meters
Wireless Technology	2.4 GHz
Connection	USB-C
Driver	53mm Dynamic
Frequency Response	10Hz - 21kHz
Headphone Impedance	32 Ω
Microphone Frequency Response	50Hz - 18kHz
Compatibility	PC, PS5, PS4