EasyManuals Logo

HyperX Cloud Stinger 2 Wireless User Manual

HyperX Cloud Stinger 2 Wireless
273 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Document No. 676A2AA.A01 HyperX Cloud Stinger 2 Wireless Page 17 of 17
Manually Pairing the Headset and Wireless Adapter
The headset and wireless adapter are automatically paired together out of the box. But if manual
pairing is needed, follow the steps below to pair the headset and wireless adapter.
1. While the headset is off, hold the power button until the headset status LED starts blinking
red/green rapidly.
2. While the wireless adapter is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.)
to press the button inside the pin hole until the adapter LED starts blinking rapidly.
3. Wait until both the headset LED and the USB adapter LED are solid. The
headset and wireless adapter are now paired together.
Questions or Setup Issues?
Contact the HyperX support team at: hyperx.com/support

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HyperX Cloud Stinger 2 Wireless and is the answer not in the manual?

HyperX Cloud Stinger 2 Wireless Specifications

General IconGeneral
Driver50mm
Impedance32 Ω
T.H.D.< 2%
Weight275g
MicrophoneYes
Microphone ElementElectret condenser microphone
Microphone Sensitivity-40dBV (1V/Pa at 1kHz)
Battery LifeUp to 20 hours
Wireless RangeUp to 20 meters
Wireless Technology2.4GHz
CompatibilityPC, PS5, PS4
TypeOver-ear
Cable Length and TypeUSB charging cable (0.5m)
Microphone Polar PatternNoise-cancelling
ConnectionWireless USB

Related product manuals