HyperX Pulsefire Raid User Manual

Document No. 480HX-MC005B.A01
HyperX Pulsefire Raid
TM
Page 5 of 5
Installation
Connect the USB connector to the computer.
Function Keys
Function Keys
Secondary Feature
DPI button
Change between DPI presets. Default values are:
- 800 DPI (blue).
- 1600 DPI (yellow).
- 3200 DPI (green).
HyperX NGENUITY Software
To customize lighting, DPI, and macro settings, download the HyperX NGENUITY Software here:
hyperxgaming.com/ngenuity.
Using with Console
Connect the USB connector to PS4 or Xbox One to use with console.
Factory Reset
If you are experiencing any issue with the mouse, you can perform a factory reset. Onboard memory
will be cleared, and all settings will revert back to default.
Function Keys
Secondary Feature
Hold DPI button + mouse wheel
button down for 5 seconds
Perform a factory reset on the mouse.
Questions or Setup Issues?
Contact the HyperX support team at: hyperxgaming.com/support/

HyperX Pulsefire Raid Specifications

General

Purpose	Gaming
Scroll type	Wheel
Sensor type	Premium Pixart PMW3389
Buttons type	Pressed buttons
Polling rate	1000 Hz
Buttons quantity	11
Device interface	USB Type-A
Acceleration (max)	50 G
Mouse tracking speed	450 ips
Movement detection technology	Optical
Customizable movement resolution	Yes
Buttons durability (million clicks)	20
Form factor	-
Laser color	Red
Product color	Black
Illumination color	Blue, Green, Red
Surface coloration	Monochromatic
Power source	Cable
Compatibility	PC, PS4, PS4 Pro, Xbox One, Xbox One S
Cable length	1.8 m
Cable features	Braided

Weight and Dimensions

Depth	127.8 mm
Width	41.5 mm
Height	71 mm
Weight	125 g