HyperX Pulsefire Surge

Document No. 480HX-MC002.A01
HyperX Pulsefire Surge™ RGB Gaming
Mouse
Page 5 of 6
Function Keys:
Function Keys
Secondary Feature
DPI button
Change between DPI presets. Default values are:
- 800 DPI (blue).
- 1600 DPI (yellow).
- 3200 DPI (green).
DPI button + Mouse wheel click
Switch between the default on board memory profiles:
- Profile 1: RGB wave.
- Profile 2: Color cycle.
- Profile 3: Solid red.
DPI button + Back click button
Decrease LED brightness. There are 4 brightness levels:
off, low, medium and high.
DPI button + Forward click
button
Increase LED brightness. There are 4 brightness levels:
off, low, medium and high.