Need help?Do you have a question about the Hyster Fortis H40FT and is the answer not in the manual?
General| Model | H40FT |
|---|---|
| Category | Forklifts |
| Number of Wheels | 4 |
| Tire Type | Pneumatic |
| Mast Type | Three-stage |
| Engine Type | Diesel |
| Transmission | Powershift |
| Rated Capacity | 4000 lbs |
| Engine | Diesel |
| Power Source | LPG or Diesel |
Essential knowledge for safe operation and inspection of the lift truck.
Instructions on maintaining situational awareness and clear vision while operating.
Guidelines for handling loads safely and within capacity limits.
General principles for safe operation and decision-making.
Precautions and awareness related to the operating environment.
Emphasizes the critical importance of using the seat belt for operator safety.
Explanation of factors affecting lift truck stability and center of gravity.
How to determine and use the lift truck's load capacity and load center.
Essential pre-operation checks to ensure safe and proper functioning.
Procedures for performing checks with the engine not running.
Steps for safely starting the lift truck engine.
Specific steps for starting trucks equipped with a key switch.
Specific steps for starting trucks with a keyless start option.
Procedures for performing checks while the engine is running.
Fundamental steps and considerations for operating the lift truck.
Requirement for operators to be trained and authorized.
Safety warning against allowing unauthorized persons to ride the lift truck.
Safe techniques and considerations for turning and steering.
Awareness and safety procedures related to lift truck tail swing.
Fundamental principles and considerations for handling loads.
Procedures for safely lifting, lowering, and tilting loads.
Steps for securely engaging and disengaging loads from the forks.
Safe procedures for traveling with a load.
Procedure for safely lowering a load in an emergency situation.
Safe procedures for gradually stopping the lift truck.
Steps for safely parking the lift truck.
Procedures for performing daily or 8-hour checks with the engine off.
Guidance on checking the presence and condition of safety labels.
Checks for the proper function and condition of the operator restraint system.
Safe procedures for adding fuel to the lift truck.
Procedures for jump-starting the lift truck.
Steps and safety precautions for loading the lift truck onto a transport.
Steps and safety precautions for unloading the lift truck from a transport.
Schedule outlining inspection, lubrication, and maintenance intervals.
Procedures for performing checks while the engine is running.
Information and checks for the service brake system.
Checking the operation of the service brakes.
Procedures for adjusting and testing the parking brake.
Checking engine oil pressure and related indicator lights.
Checking the operation of all control levers and pedals.
Procedures for operating the lift system safely.
To Next Page