Need help?Do you have a question about the Hyster Fortis S70FT and is the answer not in the manual?
General| Number of Wheels | 4 |
|---|---|
| Tire Type | Pneumatic |
| Model | S70FT |
| Category | Forklifts |
| Load Capacity | 7000 lbs |
| Power Source | Engine |
| Fuel Type | Gasoline, LPG |
Essential checks and procedures for safe operation and handling of the lift truck.
Guidelines for maintaining awareness of surroundings and preventing accidents.
Instructions for safely handling loads within specified weight and load center limits.
Explanation of center of gravity and its impact on lift truck stability and load handling.
Information on lift truck capacity as indicated on the Nameplate and load center determination.
Pre-operation checks and procedures to ensure the lift truck is in safe working order.
Daily inspection checklist for lift truck components before starting the engine.
Step-by-step instructions for starting the lift truck engine safely.
Specific starting sequence for lift trucks equipped with a key switch.
Specific starting sequence for lift trucks equipped with a keyless start system.
Procedures for checking lift truck functions with the engine running.
Importance of fastening the seat belt for operator safety, especially during tip-overs.
Details on engine shutdown modes due to faults and powertrain protection.
Fundamental operating procedures and operator qualifications for lift trucks.
Safety warnings and techniques for turning and avoiding tip-overs.
Basic principles of load handling, capacity, and stability factors.
Steps for safely engaging and disengaging loads from the forks.
Guidelines for safe travel with loads, including mast position and visibility.
Procedure for lowering a load using the emergency load lowering valve.
Steps for safely parking the lift truck to prevent damage or injury.
Safety and procedural guidelines for moving a lift truck onto a transport vehicle.
Steps and precautions for safely loading a lift truck onto a transport.
Procedures for safely unloading a lift truck from a transport.
Schedule outlining inspection, lubrication, and maintenance intervals for lift truck components.
Procedures for checking fuel, oil, and coolant systems for leaks and proper levels.
Procedures for checking lift system operation, including mast movement and hose tracking.
Safety precautions and steps for adding unleaded gasoline to the lift truck.
Safety warnings and procedures for handling LPG fuels and tanks.
Precautions and procedures for refilling LPG tanks, including safety checks.
Safety precautions when adding gasoline or diesel fuel, including static spark prevention.
Procedures for jump-starting the lift truck using a battery charger or another truck.
Instructions for safely jump-starting the lift truck with a battery charger.
Instructions for safely jump-starting the lift truck using another vehicle.
To Next Page