Need help?Do you have a question about the Hyster Fortis H60FT and is the answer not in the manual?
General| Load Center | 24 inches |
|---|---|
| Tire Type | Pneumatic |
| Transmission Type | Electronic powershift |
| Load Capacity | 6000 lbs |
| Engine Type | Diesel |
| Transmission | Powershift |
| Fuel Tank Capacity | 33.5 liters |
| Engine | 4.3L |
| Mast Type | 3-Stage Full Free Lift |
Lists essential knowledge for safe lift truck operation.
Emphasizes visibility and awareness of surroundings.
Provides guidelines for handling loads safely.
General advice for safe lift truck operation.
Highlights awareness of the operating environment.
Stresses the importance of fastening the seat belt for protection.
Describes safety equipment like load backrest and overhead guard.
Explains the purpose and importance of safety labels.
Warns against unauthorized modification of the lift truck.
Outlines pre-operation checks for safety.
Lists daily or 8-hour checks when the engine is off.
Details the steps for starting the lift truck engine.
Outlines operational checks with the engine running.
Discusses operational techniques for safe and efficient use.
Covers fundamental procedures for operating a lift truck.
General principles for handling loads.
Steps for lifting, lowering, and tilting loads.
Procedures for picking up and setting down loads.
Guidelines for traveling with loads.
Procedure for lowering a load in emergencies.
Operations to perform when parking the lift truck.
General warnings and cautions related to maintenance.
Inspection points for mast, carriage, hoses, chains, and attachments.
Procedures for checking fluid leaks.
Checks for hydraulic system oil level and leaks.
Procedure for checking engine oil level and pressure.
General information about forks and their identification.
Pre-operation checks with the engine running.
Procedure for adjusting and testing the parking brake.
Procedures for safely loading the lift truck onto a transport vehicle.
Procedures for safely unloading the lift truck.
To Next Page