Need help?Do you have a question about the Hyster H1.50-1.75XM and is the answer not in the manual?
Describes the frame, connected parts, and procedures for various components.
Details the frame construction and components mounted on the operator module.
Step-by-step instructions for safely removing the operator module from the lift truck.
Guidelines for correctly installing the operator module back onto the lift truck frame.
Procedure to safely remove the hood and side covers, including disconnecting springs and rods.
Steps for installing the hood and side covers, reconnecting springs and rods.
Instructions for removing and installing the overhead guard, including electrical connections and bolts.
Steps for safely removing the counterweight, including LPG system precautions and lifting.
Details on installing spacers, mounting the counterweight, and securing it with capscrews.
Instructions for replacing the muffler, noting the counterweight removal requirement and exhaust pipe connection torque.
Steps for draining coolant and removing the radiator, including safety warnings about hot coolant.
Procedure for installing the radiator, fan shroud, and connecting coolant hoses.
Checks and adjustments for the seat belt, hip restraint, seat, hood, and latch for proper function.
To Next Page
General