Need help?Do you have a question about the Hyster L177 and is the answer not in the manual?
Procedures for working near the mast, including lowering the mast or using safety chains.
Procedure for removing forks from the carriage, noting weight and required lifting devices.
Procedure for installing forks onto the carriage, ensuring proper alignment and engagement.
Inspection of forks for cracks, wear, and alignment, including tip height difference specifications.
Procedures for removing, repairing, and installing the standard carriage assembly.
Procedures for removing, cleaning, inspecting, repairing, and installing the sideshift carriage.
Procedures for removing the mast assembly from the lift truck, including safety precautions.
Disconnecting mast pivot pin and stub shaft connections from the drive axle mounts.
Checking mast and mounting flanges for wear or damage, including bushings and pins.
To Next Page
General