Need help?Do you have a question about the Hyster E50XM and is the answer not in the manual?
General| Model | E50XM |
|---|---|
| Power Source | Electric |
| Number of Wheels | 4 |
| Mast Type | 2-Stage, 3-Stage, or 4-Stage |
| Category | Forklifts |
| Load Capacity | 5000 lbs |
| Voltage | 48V |
| Tire Type | Cushion |
| Turning Radius | Varies with configuration |
Essential safety guidelines for working on or near the mast assembly.
Steps for safely removing forks from the carriage.
Steps for installing forks onto the carriage.
Detailed procedure for removing the standard carriage.
Steps for removing the hang-on sideshift carriage.
Procedures for repairing both standard and hang-on sideshift carriages.
Steps for installing the standard carriage.
Steps for installing the hang-on sideshift carriage.
Procedure for removing the integral sideshift carriage.
Cleaning and inspection of carriage components.
Repair steps for carriage components, including cylinder seals.
Steps for removing the mast assembly.
Steps for installing the mast assembly.
Disassembly of two-stage masts.
To Next Page
