Need help?Do you have a question about the Hyster E40HSD3 and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| Mast Type | 2-Stage, 3-Stage, 4-Stage (depending on configuration) |
| Number of Wheels | 4 |
| Tire Type | Pneumatic or Cushion |
| Voltage | 48 V |
Explains how to navigate menus using the display buttons (UP, RIGHT, DOWN, LEFT, ENTER).
Explains that CCS software is accessible via the dash display for setting functions.
Instructions on using UP, DOWN, LEFT, RIGHT, and CENTER buttons for menu interaction.
Initial step to access the supervisor menu by entering a password.
Access point to view and manage various truck hour meter functions.
Allows adjustment and setting of lift truck performance levels.
Options for adding, editing, deleting, and managing operator passwords.
View and manage logs related to operator activity and truck usage.
Displays factory-installed data such as model, serial number, and voltage.
Shows the current software version coordinating all truck nodes.
Configuration for the first performance level.
Configuration for the second performance level.
Configuration for the third performance level.
Configuration for the fourth performance level.
Parameter to set maximum forward travel speed of the lift truck.
Parameter to set maximum reverse travel speed of the lift truck.
Parameter to adjust traction acceleration rate from max to min.
Parameter to adjust maximum braking rate when entering plugging mode.
To Next Page
