To Next PageTo Next Page
Need help?Do you have a question about the Hyster E40XMS and is the answer not in the manual?
General| Model | E40XMS |
|---|---|
| Power Source | Electric |
| Voltage | 48 V |
| Number of Wheels | 4 |
| Tire Type | Pneumatic |
| Battery Voltage | 48 V |
| Travel Speed (unloaded) | 9.5 mph |
| Turning Radius | Varies depending on configuration |
| Overall Length | Varies depending on configuration |
| Mast Height (lowered) | Varies depending on mast type |
| Weight (without battery) | Varies depending on configuration |
| Overall Width | 44 inches (1118 mm) |
Overview of instrument clusters for XM model lift trucks, including repair procedures.
Details the instrument cluster installation on the steering column for internal combustion trucks.
Provides basic operational information for electric lift trucks using a standard display panel.
Offers diagnostic capabilities, more indicators, and performance settings for electric lift trucks.
Details the features and operational characteristics of the Curtis 1215 display panel.
Step-by-step instructions for removing and disassembling the cluster-type display panel.
Instructions for assembling and installing the cluster-type display panel.
Procedure for replacing the entire display panel assembly on electric lift trucks.
Details the types and replacement procedures for battery indicators on display panels.
Information on the digital display component specific to the enhanced display panel.
Describes switches and indicators for status codes and performance levels on the enhanced display panel.
Instructions for replacing individual parts of the standard display panel assembly.
Steps to remove the Curtis 1215 display panel from the battery compartment cover.
Steps to install the Curtis 1215 display panel into the instrument panel.
