Need help?Do you have a question about the Hyster E3.50-5.50XL3 and is the answer not in the manual?
Explains mast weldments, channels, load rollers, and their function in lifting.
Describes the carriage as a separate section moving on load rollers within vertical channels.
Details the two-stage mast with limited free-lift (LFL) and its components.
Describes the two-stage mast with full free-lift (FFL) and its three lift cylinders.
Details the three-stage mast with full free-lift (FFL) and its three single-stage lift cylinders.
Specific actions to take when working near the mast for safety.
Instructions for safely removing a fork from the carriage.
Steps for installing a fork back onto the carriage.
Steps to safely remove the carriage from the mast assembly.
Steps to remove the sideshift carriage from the mast.
Instructions for taking apart the sideshift carriage components.
Steps for reassembling the sideshift carriage.
Steps for installing the repaired sideshift carriage back onto the truck.
Steps to remove the mast from H3.50-5.50XM (H70-120XM) lift trucks.
Steps to remove the mast from S3.50-5.50XM and E3.50-5.50XL3 lift trucks.
Instructions for disassembling the two-stage mast with limited free-lift.
To Next Page
General