Need help?Do you have a question about the Hyster E50XM2 and is the answer not in the manual?
General| Model | E50XM2 |
|---|---|
| Category | Forklifts |
| Load Capacity | 5000 lbs |
| Power Source | Electric |
| Lift Height | 189 inches |
| Battery Voltage | 48V |
| Tire Type | Pneumatic |
Outlines essential safety protocols for tasks performed in proximity to the mast.
Detailed steps for safely removing forks from the carriage, including warnings.
Instructions for correctly installing forks onto the carriage, ensuring proper engagement.
Step-by-step procedure for removing a standard carriage from the mast assembly.
Procedure for safely removing the hang-on sideshift carriage from the standard carriage.
Repair instructions for both standard and hang-on sideshift carriage components.
Steps for correctly installing the hang-on sideshift carriage onto the standard carriage.
Process for removing the integral sideshift carriage assembly.
Guidelines for cleaning and inspecting carriage bars and bearings for wear and damage.
Detailed repair procedures for carriage components, including load rollers and cylinder seals.
Instructions for safely removing the mast assembly, noting its weight and required lifting equipment.
Specific mounting procedures for H/S2.00-3.20XM and related mast models.
Specific mounting procedures for H/S1.50-1.75XM and related mast models.
Specific mounting procedures for S/E/J2.00-3.00XL and related mast models.
Specific mounting procedures for J1.60-2.00XMT and related mast models.
Detailed steps for disassembling two-stage LFL and FFL mast types.
To Next Page
